How To Use USB In Computer Embroidery Machine

The traditional manual embroidery can be completed at a high speed and efficiently. It is an advanced embroidery facility nowadays. Its task principle is to control the data of bits and pieces, and to decode the tasks of various motors by decoding the rules, so as to embroider patterns.

The pmission of trick files is the first step in the computer embroidery machine. In computer embroidery, the pmission of tricks is carried out through two roads.

(1) pfer the trick files from the upper computer to the computer embroidery machine through the bus.

(2) computerized embroidery machine

Read the trick file indirectly from the storage medium.

For the first problem, most of the late coherence methods are coherent through RS232 or RS485 method. With the spread of USB skills, USB has become the yardstick of communication between PC and embroidery machine. Almost all computerized embroidery machines support USB's communication with PCs. For the second problem, most of the products on the market now read data from special trick cards, so the versatility is very low.

With the development of U disk, the problem can not be solved thoroughly after investigation.

The important position and adjustment requirement of the machine is important. Users are expected to adjust and use the machine in a standardized way, and provide guidance for experienced maintenance personnel to find and deal with more complicated problems.

We feel that indirect reading of USB by computer embroidery machine will greatly improve the versatility of computer embroidery machines, thereby improving the competitiveness of products.

Based on the above analysis,

The application of the computerized embroidery machine can be concluded as follows: the computerized embroidery machine can not only communicate with the upper computer, but also adjust the pressboard of the pressboard to ensure that the pressboard is pushed to the maximum at both sides, and the outer side is equal to the left and right sides of the inner side of the tray.

Press the foot plane and needle plate plane, tooth surface is not closely caused by the jump needle; grinding feet and teeth, so that the three parts of the plane close, or replace the qualified presser feet and teeth; replace worn sleeve or needle bar can also read the USB disk as the host.